HKP
The HKP rotary mower is a cost-efficient variant for orchards. It is used when the tree strip is sprayed with chemicals or is kept open with a cultivator. In addition, it has optimally proven itself in general green area maintenance.
The linear lateral adjustment enables lateral reach of the HKP on the tractor.
Mounting:
– front or rear
Characteristics
Special equipment:
- PTO/PTO with overrunning clutch
- Timber cutter
- Gear offset from the centre (onlyHKP2000)
- Hydraulic cylinder for lateral adjustment
- Front mounting
- Roller, in combination with 2 skids
- Track wheels
- Lateral grass ejector
Per rotary cutter, two movable, freely-oscillating cutters are mounted that deliver a clean and precise cutting pattern.
In addition two timber cutters ➀ can be mounted on the round cutter plate to shred light wood to 3 cm Ø.
Technical Data
| Mower | HKP 1600 |
HKP 2000 |
| Working width, (m) | 1,55 | 1,94 |
| Max. lateral offset from tractor centre, (m) | 1,41 | 1,85 |
| Setting range/linear: (m) | 0,40 | 0,63 / rear 0,40 / front |
| Power requirement* from kW/hp:. | 18 / 25 |
22 / 30 |
| Rpm of PTO: U/min | 540, 750 or 1.000 |
|
| Weight**: approx. (kg) | 360 | 410 |
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Basic equipment
- Low and stable design and smooth surfaces
- Good cut quality–supported oscillating knife with large overcut
- Mechanical linear lateral adjustment
- Cutting height adjustment
- Skids
- Lateral transmission and high-quality,reinforced belt drive
- Double ground plate
- Accident prevention guards
- Three point linkage for Cat. I and II mounting