AFLR
Mounting:
– front or rear
Well proven range of use
- on paddocks
- for mulching under fences
- in solarparks
- in orchards
- in the pasture and land maintenance
Characteristics
- Padded, twist-off swivel wheel, adjustable starting pressure via spring tension
- Low and stable design
- Three point linkage for Cat. I and II mounting
- Hydraulic parallelogram adjustment
- 2 rear rollers for best operating characteristics and cutting height adjustment
- Front twist off wheels
- Reinforced V-belt drive
- High-quality bevelgear
- Accident prevention guards
- Low maintenance
Special equipment
- PTO/PTO with overrunning clutch/PTO with star profile
- Electro-hydraulic fine control of the wing, incl. hydraulic linear lateral adjustment (only if the tractor is available with a double-acting control unit pressure-free return or a single-action with pressure-free rewind)
- Oil flow regulator/flow dividers, loose
- Oil flow regulator fully installed on the device
- only required for fine-tuning if tractor does not have another
- only required at over 25 l /min
- Front mounting
- Hydraulic withdraw wing (single acting control unit necessary)
Technical Data
| Mower Type |
AFLR 1800 | AFLR 2300 | AFLR 2500 |
| Working width (m) | 1,40 – 1,76 | 1,83-2,39 | 1,93 – 2,56 |
| max. lateral offset from tractor centre, (m) | 1,60 | 2,33 | 2,49 |
| Setting range/ linear, (m) | 0,40 | 0,63 | 0,63 |
| Power requirement*, from kW/hp | 15 / 20 | 26 / 35 | 20 / 40 |
| Rpm of PTO: U/min | 540 or 1.000 | 540 or 1.000 | 540 or 1.000 |
| Weight**: approx. (kg) | 380 |
480 |
485 |
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment